0 items

1 fase ingegoten veiligheidstransformator met DIN rail clip en schroefklemmen

Vanaf: 25,20

Wissen
Artikelnummer: Niet beschikbaar Categorie:

Beschrijving

AC/AC Isolation transformers for DIN rail mounting

Series of moulded 1-phase EI transformers with screw connectors and TS35 DIN rail mounting

  • High quality safety and isolating transformers
  • Resin encapsulated
  • Fused input and output
  • Galvanic separation
  • Product specification on permanent label
  • High efficiency, low regulation design
  • 100% electrical and flash tested
  • For permanent fixation at DIN rail, not clip on, clip off purpose

Specifications:

Power:  Nominal 72 VA – short term 100 VA.
Frequency: 50/60 Hz
Finish:Encapsulated in plastic house with DIN clip
Dimensions: 82.5 x 89.5 x 82 mm
Weight: 1.4 Kg nominal
Isolation: 4 kV RMS (4.6kV for  400V)
Temp. class: max. ta = 40°C / insulation class B (130°)
Standards: EN61558-2-4, EN61558-2-6

keurmerk keurmerk

Detailed specifications:

Primary voltage 230 V +/- 10 % 115 V +/- 10 % 230 V +/- 10 % 400 V +/- 10 %
Primary fuse 2 AT (anti-surge 5×20) 3.15 AT (anti-surge 5×20) 2 AT (anti-surge 5×20) 2AT / 500V (anti-surge 6.3×32)
Secondary voltage 12 V 24 V 24 V 24 V
Secondary current 6 A 3 A 3 A 3 A
Secondary fuse 6.3 A anti-surge 3.15 A anti-surge 3.15 A anti-surge 3.15 A anti-surge
Secondary no-load Voltage 13.4 V 26.5 V 26.5 V 26.5 V

Extra informatie

Gewicht Niet beschikbaar
Afmetingen 8.25 × 8.95 × 8.2 cm
Primaire spanning

115 V, 230 V, 400 V

Secundaire spanning

12 V, 24 V